SDi Fire

male using a solo 065

SMOKE DETECTOR TESTING

 

At SDi Fire, we offer a variety of fire protection and fire safety equipment for businesses and companies all over the world. One of the many types of products we provide are detector testers and equipment for industrial and commercial smoke detectors. If you own a business or a building, smoke detector testing several times a year is extremely important in ensuring that your smoke detectors are functioning properly to keep your employees and your products safe from fire and damage.

SMOKE DETECTOR TESTING

 

At SDi Fire, we offer a variety of fire protection and fire safety equipment for businesses and companies all over the world. One of the many types of products we provide are detector testers and equipment for industrial and commercial smoke detectors. If you own a business or a building, smoke detector testing several times a year is extremely important in ensuring that your smoke detectors are functioning properly to keep your employees and your products safe from fire and damage.

red solo detector testers logo

SOLO 365 Electronic Detector Tester

Solo 365 is the latest advancement in smoke detector testing. It delivers smoke via smoke cartridges for faster, simpler, and cleaner testing. Not only is Solo 365 lighter, slimmer, and easy to use, but it also has a built in LED light for testing in dimly lit areas.

  • Cartridge technology eliminates the need for canned aerosol
  • Compatible with Solo access poles
  • Faster detector clearing and activation
  • Flexible, slim design for access to tight spaces
  • Automatic LED light for dimly lit areas
  • Battery powered – no hanging wires / tangled cables
  • Transparent test cup for clear view of detector LED
  • ASD Adapter available from our accessories page

SOLO ES6 Cartridges

A compact smoke detector testing cartridge for use with Solo 365. The Solo ES6 cartridge is non-hazardous and non pressurized – allowing for easy storage and transportation.

  • Detector manufacturer approved
  • Non-flammable, non-pressurized, and non-hazardous
  • Rapid activation of detectors
  • On demand smoke – less wastage and risk of contamination
  • Cartridges sold in packs of 6

SOLO 330 Aerosol Dispenser

The Solo 330 aerosol dispenser is a valuable piece of equipment for smoke detector testing. The Solo 330 is designed to fit the widest range of detectors, with the Solo 332 also available for extra-large detector sizes.

  • Lightweight and simple to use
  • Universal design suits widest range of detectors (up to 4″ / 100mm in diameter)
  • Spring-loaded solution for suspended ceilings
  • Transparent test cup for clear view of detector LED
  • Swing frame for use at / from angles
  • Outstanding quality backed by a limited lifetime warranty
  • Solo 332 suitable for detectors up to 7″ / 177mm in diameter

SOLO A10

The Solo A10 smoke detector tester has a fast activation and fast clearing time. It is designed to be used handheld or in an aerosol dispenser like the Solo 330. This tester is non-flammable, non-toxic, silicone free, and leaves no harmful residue on the tested smoke detectors.

  • Detector manufacturer approved
  • Non-flammable
  • Fast detector activation and clearing time
  • Non-toxic
  • Silicone free testing, reduces risk of detector contamination
  • No harmful residue
  • For use handheld or in an enclosed delivery system (Solo 330)
  • Conforms to new global aerosol regulations
  • Sold in cases of 12
red and blue smoke centurion aerosol smoke logo for smoke detector testing

Smoke Centurion

The Smoke Centurion Smoke Detector Tester (M8) is an aerosol tester that checks the functionality of smoke detectors. Smoke detector testing with Centurion is fast and easy-to-use. It can be used handheld or with help from a dispenser. The Smoke Centurion can be used to test a wide range of smoke detectors and is silicone free, which reduces the risk of detector contamination.

  • More tests per can
  • Fast detector activation
  • Lowest cost per test
  • Either hand-held or with use of a dispenser
  • Silicone free testing, reduces risk of detector contamination
  • Formula approved by leading detector manufacturers
  • High eco responsibility: ozone friendly (no CFCs) and low GWP propellant
  • Sold in cases of 12
red and black smoke sabre smoke detector testing logo

Smoke Sabre

The Smoke Sabre smoke detector tester offers the lowest cost per test of any of the detector testers offered at SDi Fire. The Smoke Sabre is silicone free and 100% biodegradable. Each smoke detector tester is easy to use and does not cause buildup on the detectors.

  • Detector manufacturer endorsed
  • Fast detector activation
  • The end of harmful residue – risk is designed out with the sabre
  • Silicone free smoke detector testing, reduces risk of detector contamination
  • Eco-resposibility – 100% bio-degradable sabre, ozone friendly, no CFCs and low GWP
  • Sold in cases of 12
testifire multi stimulus detector tester logo

Testifire 2001

Testifire is the world’s first multi-stimulus detector tester. The Testifire 2001 is available for smoke, heat, and CO detectors. It enables faster and more efficient testing of both single and multi-sensor detectors. Testifire is the result of several years of technological development and as a result is by far the most advanced tester available. It is UL certified and is approved by leading detector manufacturers from around the world.

  • Uses capsule technology, eliminating the need for canned aerosol
  • Saves time through its ability to test both smoke and heat detectors without switching units
  • Fully programmable to carry out single, simultaneous or combined test cycles
  • Testifire 2001 kit includes Testifire, smoke capsule, CO capsule, charger, and 2 batteries
  • Compatible with Solo access poles
  • Detector manufacturer endorsed
  • Testifire kits are also available with Solo poles, equipment bags and a detector removal tool.

TS3 Smoke Capsules

Compact smoke detector testing capsules for use with Testifire

  • Detector manufacturer approved
  • Non-flammable, non-pressurized and non-hazardous
  • On demand smoke – less wastage and risk of contamination
  • Capsules sold in packs of 3

Testifire XTR2 Connected Smoke and Heat Detector Tester

Testifire XTR2 combines testing and reporting to provide insights on the detectors being tested. During testing, Testifire XTR2 senses the detector LED to confirm the test result – automating the recording of results and pushing the data into a customized report. By working alongside the DT Connect app, Testifire XTR2 equips users with premium features that streamline the testing process, manage site assets, and optimize reports. The cloud portal gives an instant overview of work carried out, making it easy to share inspection reports with clients and gain insight on the status of the Testifire XTR2 units being used.

  • All-in-one smoke and heat testing
  • Automated pass or fail record
  • Record and identify the device type, location, and address on-site
  • Select panel type and record addressable panel time for fire panel verification
  • Match your device test results against the fire panel event log
  • Link to cloud for test results and reporting
  • Upload your logo to appear on all reports
  • Check Testifire XTR2 smoke levels, battery charge, and generator life

DT Connect

Unlock the full potential with DT Connect! Testifire XTR2 and DT Connect combine to give you comprehensive proof of testing, through detailed inspection reports and data insights. 

Control and manage your Testifire XTR2 devices and send completed inspection reports to clients.

Testifire XTR2 TES3 Cartridges

A compact smoke detector testing cartridge for use with Testifire XTR2. The Testifire XTR2 TES3 cartridge is non-hazardous and non pressurized – allowing for easy storage and transportation.

  • Detector manufacturer approved
  • Non-flammable, non-pressurized, and non-hazardous
  • Rapid activation of detectors
  • On demand smoke – less wastage and risk of contamination
  • Cartridges sold in packs of 3 or 6.

Testifire XTR2 Generator

The Testifire XTR2 Generator is a field replaceable part for use with Testifire XTR2. The generator easily fits within the back of the Testifire XTR2.

red and black scorpion logo

Scorpion

Scorpion is the solution for buildings with hard-to-access detectors. Suitable for both Point and Aspirating Smoke Detection (ASD) systems, Scorpion ensures all smoke detectors can be tested – regardless of location. The Scorpion head unit is permanently installed adjacent to a point detector or sampling hole on an Aspirating Smoke Detection pipe. The smoke generator is connected to an access point mounted at a convenient, easy to access location. Functional testing of the detector is then easily and safely achieved by connecting a portable controller to the access point. Alternatively, up to 8 head units can be connected to a wall mounted control panel. Scorpion can be retrofitted to existing system or installed with new systems. The time and effort to install Scorpion to an existing system is quickly absorbed by the time and effort taken to test the system without Scorpion.

  • Tests hard-to-access detectors
  • Ideal for lift shafts, ceiling voids, secure rooms and high atria
  • Cost saving – no need for additional access equipment or third party personnel
  • Time saving – less time spent organizing and carrying out testing
  • Compliance – ensures all detectors can be tested as required by standards