TESTIFIRE MULTICRITERIA DETECTOR TESTER
The Testifire was the first multicriteria detector tester on the market. It makes testing both single and multi-sensor detectors simpler and more efficient. Testifire 1001 tests sensors by producing heat and smoke, and the Testifire 2001 tests sensors by producing heat, smoke, and carbon monoxide in a single unit. Testifire, depending on a business’s needs, can deliver each stimulus individually or deliver all three stimuli simultaneously. These multicriteria detector testers produce smoke, carbon monoxide and heat without pressurized cans or hazardous materials, such as silicone. Testifire produces more than one stimulus at a time, lowering the overall testing time to 66%. Additionally, Testifire uses a clearing cycle, which allows detectors to reset without triggering their alarms again.
TESTIFIRE MULTICRITERIA DETECTOR TESTER
The Testifire was the first multicriteria detector tester on the market. It makes testing both single and multi-sensor detectors simpler and more efficient. Testifire 1001 tests sensors by producing heat and smoke, and the Testifire 2001 tests sensors by producing heat, smoke, and carbon monoxide in a single unit. Testifire, depending on a business’s needs, can deliver each stimulus individually or deliver all three stimuli simultaneously. These multicriteria detector testers produce smoke, carbon monoxide and heat without pressurized cans or hazardous materials, such as silicone. Testifire produces more than one stimulus at a time, lowering the overall testing time to 66%. Additionally, Testifire uses a clearing cycle, which allows detectors to reset without triggering their alarms again.
Testifire 1001 Multicriteria Detector Tester
Testifire is the world’s first multi-stimulus detector tester for smoke and heat detectors. It enables faster and more efficient testing of both single and multi-sensor detectors. Testifire is the result of several years of technological development and as a result is by far the most advanced tester available. It is UL certified and is approved by leading detector manufacturers from around the world.
- Uses capsule technology, eliminating the need for canned aerosol
- Saves time through its ability to test both smoke and heat detectors without switching units
- Fully programmable to carry out single, simultaneous or combined test cycles
- Testifire 1001 kit includes Testifire, smoke capsule, charger, and 2 batteries
- Compatible with Solo access poles
- Detector manufacturer endorsed
- Testifire Kits also available with Solo poles, equipment bags and detector removal tool.
Testifire 2001 Multicriteria Detector Tester
The Testifire 2001 offers all the features and benefits of the 1001 – but with the added ability to test CO. CO testing is carried out using a Testifire head unit and a TC3 capsule, safe levels of CO are generated via the capsule once the tester is placed over the detector.
- Uses capsule technology, eliminating the need for canned aerosol
- Saves time through its ability to test smoke, heat, and CO detectors without switching units
- Fully programmable to carry out single, simultaneous or combined test cycles
- Testifire 2001 kit includes Testifire, smoke capsule, CO capsule, charger, and 2 batteries
- Compatible with Solo access poles
- Detector manufacturer endorsed
- Testifire Kits also available with Solo poles, equipment bags and detector removal tool
TS3 Smoke Capsules
Compact smoke detector testing capsules for use with Testifire
- Detector manufacturer approved
- Non-flammable, non-pressurized & non-hazardous
- On demand smoke – less wastage and risk of contamination
- Capsules sold in packs of 3
TC3 CO Capsules
Compact CO capsules for use with Testifire (2001 only)
- Detector manufacturer approved
- Non-flammable
- ~150 uses per capsule
- Capsules sold in packs of 3
SOLO 770 Battery Baton
The Solo 770 Battery Baton provides power for the Solo 460, Testifire, and Scorpion.
- 3000 mAh NiMH battery
- Can be charged in less than 90 minutes
SOLO 727 Battery Charger
The Solo 727 charger enables fast charging for both the Solo 770 and 760 Battery Batons that are used to power the Solo 460, Testifire and Scorpion.
- Fast Charge – less than 90 minutes
- Can be used with wall or car outlets
- Compatible with Solo 770 and 760 Battery Batons
Testifire XTR2 Connected Smoke and Heat Detector Tester
Testifire XTR2 combines testing and reporting to provide insights on the detectors being tested. During testing, Testifire XTR2 senses the detector LED to confirm the test result – automating the recording of results and pushing the data into a customized report. By working alongside the DT Connect app, Testifire XTR2 equips users with premium features that streamline the testing process, manage site assets, and optimize reports. The cloud portal gives an instant overview of work carried out, making it easy to share test reports with clients and gain insight on the status of the Testifire XTR2 units being used.
- All-in-one smoke and heat testing
- Automated pass or fail record
- Record and identify the device type, location, and address on-site
- Select panel type and record addressable panel time for fire panel reconciliation
- Match your device test results against the fire panel event log
- Link to cloud for test results and reporting
- Upload your logo to appear on all reports
- Check Testifire XTR2 smoke levels, battery charge, and generator life
Testifire XTR2 TES3 Cartridges
A compact smoke detector testing cartridge for use with Testifire XTR2. The Testifire XTR2 TES3 cartridge is non-hazardous and non pressurized – allowing for easy storage and transportation.
- Detector manufacturer approved
- Non-flammable, non-pressurized, and non-hazardous
- Rapid activation of detectors
- On demand smoke – less wastage and risk of contamination
- Cartridges sold in packs of 3 or 6.
Testifire XTR2 Generator
The Testifire XTR2 Generator is a field replaceable part for use with Testifire XTR2. The generator easily fits within the back of the Testifire XTR2.
